RT9715AGF
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
RT9715AGF Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, the LED driving board is mounted as Surface Mount.USB Switch is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~100°C TJ.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Load Discharge, Status Flag.The termination count is 8.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 2A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.In this case, there is 90mOhm resistance in the LED driving board.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
RT9715AGF Features
Supplied from 5V
Resistance of 90mOhm
RT9715AGF Applications
There are a lot of Richtek USA Inc. RT9715AGF Power Switches ICs applications.
- Portable GPS Device
- HDD and SSD
- Set-top-box
- Hot Swaps
- Smart Phones, Feature Phones
- Solid State Drivers
- Solid-State Drives
- Wireless Headsets
- Storage Drives
- Mobile Communication Devices
