banner_page

RT9715CGBR

N-Channel 0.939mm PMIC 5 Pin 5V SC-74A, SOT-753


  • Manufacturer: Richtek USA Inc.
  • Nocochips NO: 682-RT9715CGBR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 502
  • Description: N-Channel 0.939mm PMIC 5 Pin 5V SC-74A, SOT-753 (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Surface Mount YES
Number of Pins 5
Operating Temperature -40°C~100°C TJ
Packaging Tape & Reel (TR)
Published 2011
Feature Load Discharge, Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
ECCN Code EAR99
Resistance 90mOhm
Max Power Dissipation 300mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.939mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.5A
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 2A
Rds On (Typ) 90m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

RT9715CGBR Overview


It is packaged in the manner of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.The mounting type of the LED driver is Surface Mount.This switch is of type USB Switch.It is best to set the temperature to -40°C~100°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.As a result, there are 5 terminations.5 pins are used for operation.It consists of 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.High efficiency is possible at 5V supply voltage.In this case, there is 90mOhm resistance in the LED driving board.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.

RT9715CGBR Features


Supplied from 5V
Resistance of 90mOhm

RT9715CGBR Applications


There are a lot of Richtek USA Inc. RT9715CGBR Power Switches ICs applications.

  • Telecom and Network Systems
  • USB3.1 Power Delivery
  • Wireless Headsets
  • HDD, SSD
  • PC Card Hot Swap
  • Hot-Swap Systems
  • USB Ports/Hubs
  • Storage (HDDs, SSDs)
  • HDD and SSD
  • Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good