RT9715EGQW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PDSO-N8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
RT9715EGQW Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a 8-WDFN Exposed Pad package that includes it.Mounting type Surface Mount is selected for the LED driving board.It owns USB Switch switch type.Ensure reliable operation by setting the temperature to -40°C~100°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Load Discharge, Status Flag features available on the LED driving board.A total of 8 terminations have been found in it.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1.1A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.
RT9715EGQW Features
Supplied from 5V
RT9715EGQW Applications
There are a lot of Richtek USA Inc. RT9715EGQW Power Switches ICs applications.
- Portable Music Players
- Wireless Headsets
- Low Voltage I/O System Power
- Portable GPS Device
- USB Power Distribution
- Portable Devices
- Hot-Swap Systems
- HDD, SSD
- PDAs
- Handheld Devices
