RT9715FGBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9715FGBR Overview
It is package in Tape & Reel (TR) case.There is a package for it in the SC-74A, SOT-753 package.In this case, the LED driving board is mounted as Surface Mount.USB Switch is the type of switch owned by it.The temperature should be set to -40°C~100°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It contains 5 terminations.In order to operate, the 5 pins are used.It consists of 1 functions.The maximum output current drops to 1.1A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.There is 90mOhm resistance on the LED driver.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
RT9715FGBR Features
Supplied from 5V
Resistance of 90mOhm
RT9715FGBR Applications
There are a lot of Richtek USA Inc. RT9715FGBR Power Switches ICs applications.
- Storage Drives
- Smartphone and PDA
- Portable Devices
- PC Cards
- Wireless Headsets
- Hot-Swap Systems
- Set-top-box
- USB Ports/Hubs
- Gaming
- Hot Swap
