RT9715GGB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 110MOhm |
| Max Power Dissipation | 300mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Current Rating | 700mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RT9715GGB Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in SC-74A, SOT-753.A Surface Mount mounting is used for the LED driving board.USB Switch is the type of switch owned by it.It is best to set the temperature to -40°C~100°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.Load Discharge, Status Flag features are available on the lighting driver.In total, there are 5 terminations.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 700mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.In this case, there is 110MOhm resistance in the LED driving board.A normal operation requires that the supply voltage (Vsup) remain above 2.7V.
RT9715GGB Features
Supplied from 5V
Resistance of 110MOhm
RT9715GGB Applications
There are a lot of Richtek USA Inc. RT9715GGB Power Switches ICs applications.
- Wireless Modem Data Cards
- HDD, SSD
- Set-Top Boxes
- Portable GPS
- Various applications equipped with buttons
- USB Power Distribution
- Hard Disk Drives
- Wearable Devices
- Portable Video Game Players
- Mobile Communication Devices
