RT9715HGB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9715HGB Overview
It is package in Tape & Reel (TR) case.It's included in the SC-74A, SOT-753 package.The lighting driver is mounted in the Surface Mount position.USB Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~100°C TJ.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It has a total of 5 terminations.In order to operate, the 5 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 700mA to meet the operation criteria.High efficiency is possible at 5V supply voltage.In this case, there is 90mOhm resistance in the LED driving board.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
RT9715HGB Features
Supplied from 5V
Resistance of 90mOhm
RT9715HGB Applications
There are a lot of Richtek USA Inc. RT9715HGB Power Switches ICs applications.
- Handheld Devices
- Hot Swap
- Portable/Handheld Devices
- PC Card Hot Swap
- Telecom and Network Systems
- Hot Swap
- HDD and SSD
- Wearable Devices
- Storage Drives
- Smart Phones, Feature Phones
