RT9715HGBG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
RT9715HGBG Overview
Tape & Reel (TR) is how it's packaged.Package SC-74A, SOT-753 contains it.The LED driver is mounted as Surface Mount.USB Switch is the switch type that it owns.The temperature should be set to -40°C~100°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Load Discharge, Status Flag features is available.There are 5 terminations in it.During operation, the 5 pins are used.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 700mA.It is possible to obtain high efficiency with a supply voltage of 5V.Lighting drivers with 90mOhm resistance are used.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.
RT9715HGBG Features
Supplied from 5V
Resistance of 90mOhm
RT9715HGBG Applications
There are a lot of Richtek USA Inc. RT9715HGBG Power Switches ICs applications.
- Handheld Devices
- Smartphone and PDA
- Telecom and Network Systems
- Portable GPS
- Wireless Headsets
- Various applications equipped with buttons
- USB Power Distribution
- Set-top-box
- Gaming
- Solid State Drivers
