RT9728AHGQW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.295A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9728AHGQW Overview
It is packaged in the manner of a Cut Tape (CT).It is included with the 6-WDFN Exposed Pad package as well.The lighting driver has the mounting type Surface Mount.There is a USB Switch switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.A lighting driver with Status Flag features is available.The termination count is 6.For operation, 6 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 1.3A to meet the operation criteria.Supply voltages of 3.6V allow for high efficiency.This LED driver is equipped with a total of 6 pins.Currently, the LED driving board has 120mOhm resistance.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 5.5V.The supply voltage (Vsup) should be kept above 2.5V for normal operation.
RT9728AHGQW Features
Supplied from 3.6V
Resistance of 120mOhm
RT9728AHGQW Applications
There are a lot of Richtek USA Inc. RT9728AHGQW Power Switches ICs applications.
- Solid-State Drives
- Portable Music Players
- Portable Devices
- Various applications equipped with buttons
- PC Cards
- PDAs
- Mobile Communication Devices
- Portable Video Game Players
- USB Protection
- Smartphone and PDA
