RT9728AHZQW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.3A |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.295A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9728AHZQW Overview
Tape & Reel (TR) is how it's packaged.It is included with the 6-WDFN Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.It owns USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts on this LED driver.It has a total of Status Flag features.It consists of 6 terminations in total.6 pins are used for operation.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 1.3A when operation criteria are met.High efficiency is possible at 3.6V supply voltage.A total of 6 pins are present on it.Currently, the LED driving board has 120mOhm resistance.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage (Vsup) should be kept above 2.5V for normal operation.
RT9728AHZQW Features
Supplied from 3.6V
Resistance of 120mOhm
RT9728AHZQW Applications
There are a lot of Richtek USA Inc. RT9728AHZQW Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless Headsets
- Wireless Modem Data Cards
- PC Cards
- Portable/Handheld Devices
- USB Power Distribution
- Portable Devices
- Wireless/Networking Cards
- PC Card Hot Swap
- Various applications equipped with buttons
