RT9728ALGE
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.295A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.94mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.3A |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
RT9728ALGE Overview
It is packaged in the form of a Tape & Reel (TR).There is a SOT-23-6 package that includes it.Mounting type Surface Mount is selected for the LED driving board.USB Switch is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is P-Channel volts.It has a total of Status Flag features.In total, there are 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 1.3A.The supply voltage of 3.6V is conducive to high efficiency.Surface Mount is mounted in the way.6 pins are equipped with it.Lighting drivers with 120mOhm resistance are used.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.For normal operation, the supply voltage (Vsup) must be kept above 2.5V.
RT9728ALGE Features
Supplied from 3.6V
Resistance of 120mOhm
RT9728ALGE Applications
There are a lot of Richtek USA Inc. RT9728ALGE Power Switches ICs applications.
- USB Protection
- PDAs
- PC Cards
- Wireless/Networking Cards
- Storage Drives
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Notebook PC
