RT9742CGJ5
| Parameters | |
|---|---|
| Resistance | 70mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
RT9742CGJ5 Overview
The LED driver's packaged as a Cut Tape (CT).In the SOT-23-5 Thin, TSOT-23-5 package, it is included.Surface Mount is the mounting type of the LED driver.It owns USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Load Discharge, Status Flag features are available on the lighting driver.A total of 5 terminations can be found in it.The operation is carried out using the 23 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 2A.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driver has 70mOhm resistance.This LED driver is configured to have a maximum supply voltage of 6V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.
RT9742CGJ5 Features
Supplied from 5V
Resistance of 70mOhm
RT9742CGJ5 Applications
There are a lot of Richtek USA Inc. RT9742CGJ5 Power Switches ICs applications.
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Hot Swaps
- Low Voltage I/O System Power
- Set-top-box
- Portable Music Players
- Hot Swap
- Handheld Devices
- Notebook and Tablet Computers
- Solid-State Drives
