RT9742CGJ5F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742CGJ5F Overview
The LED driver's packaged as a Cut Tape (CT).There is a SOT-23-5 Thin, TSOT-23-5 package that includes it.The LED driver is mounted as Surface Mount.The switch type of this switch is USB Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The lighting driver has Load Discharge, Status Flag features.It consists of 5 terminations in total.The 23 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 2A.Using a voltage of 5V allows for high efficiency.55mOhm resistance is present in the lighting driver.The maximum supply voltage is set to 6V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.
RT9742CGJ5F Features
Supplied from 5V
Resistance of 55mOhm
RT9742CGJ5F Applications
There are a lot of Richtek USA Inc. RT9742CGJ5F Power Switches ICs applications.
- Portable Devices
- Mobile Communication Devices
- Low Voltage I/O System Power
- Set-Top Boxes
- Solid-State Drives
- Wearable Devices
- Storage (HDDs, SSDs)
- Hot Swap
- Various applications equipped with buttons
- Hard Disk Drives
