banner_page

RT9742DNGJ5

N-Channel 0.939mm PMIC 5V SOT-23-5 Thin, TSOT-23-5


  • Manufacturer: Richtek USA Inc.
  • Nocochips NO: 682-RT9742DNGJ5
  • Package: SOT-23-5 Thin, TSOT-23-5
  • Datasheet: -
  • Stock: 849
  • Description: N-Channel 0.939mm PMIC 5V SOT-23-5 Thin, TSOT-23-5 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case SOT-23-5 Thin, TSOT-23-5
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Published 2016
Feature Status Flag
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.939mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code R-PDSO-G5
Number of Outputs 1
Output Type N-Channel
Max Output Current 2A
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~6V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 2.2A
Rds On (Typ) 70m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 2.8955mm
RoHS Status ROHS3 Compliant

RT9742DNGJ5 Overview


As you can see, it's packaged in the way of a Cut Tape (CT).This package is included in SOT-23-5 Thin, TSOT-23-5.This lighting drivere has a mounting type of Surface Mount.There is a switch type of USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Status Flag features.A total of 5 terminations can be found in it.The LED driving board has a total of 1 functions.Maximum output current falls to 2A when operation criteria are met.As long as the supply voltage is 5V, high efficiency can be achieved.The maximum supply voltage is set to 6V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.

RT9742DNGJ5 Features


Supplied from 5V

RT9742DNGJ5 Applications


There are a lot of Richtek USA Inc. RT9742DNGJ5 Power Switches ICs applications.

  • Telecom and Network Systems
  • PC Card Hot Swap
  • PC Cards
  • Portable/Handheld Devices
  • Storage Drives
  • HDD and SSD
  • USB Ports/Hubs
  • Wearable Devices
  • Handheld Devices
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good