RT9742DNGJ5F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| RoHS Status | ROHS3 Compliant |
RT9742DNGJ5F Overview
As you can see, it's packaged in the way of a Cut Tape (CT).This package is included in SOT-23-5 Thin, TSOT-23-5.This LED driving board is mounted using the mounting type Surface Mount.It owns the USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Status Flag.There are 5 terminations in it.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 2A.Using a voltage of 5V allows for high efficiency.Vsup (maximum supply voltage) is set to 6V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.
RT9742DNGJ5F Features
Supplied from 5V
RT9742DNGJ5F Applications
There are a lot of Richtek USA Inc. RT9742DNGJ5F Power Switches ICs applications.
- Portable Music Players
- Portable GPS
- PC Card Hot Swap
- Hot Swap
- Set-top-box
- USB3.1 Power Delivery
- Smartphone and PDA
- Smart Phones, Feature Phones
- USB Power Distribution
- Hard Disk Drives
