RT9742EGJ5F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.65A |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742EGJ5F Overview
The LED driver's packaged as a Cut Tape (CT).It is included in the package SOT-23-5 Thin, TSOT-23-5.The mounting type of the LED driver is Surface Mount.A USB Switch switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.The lighting driver has Load Discharge, Status Flag features.As a result, there are 5 terminations.For operation, we use the 23 pins.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.High efficiency is possible when the supply voltage is set to 5V.The LED driver has 55mOhm resistance.Vsup (maximum supply voltage) is set to 6V.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
RT9742EGJ5F Features
Supplied from 5V
Resistance of 55mOhm
RT9742EGJ5F Applications
There are a lot of Richtek USA Inc. RT9742EGJ5F Power Switches ICs applications.
- Notebook and Tablet Computers
- Handheld Devices
- HDD, SSD
- Hot-Swap Systems
- Hot Swaps
- Storage Drives
- Hot Swap
- USB Protection
- Wireless Headsets
- Notebook PC
