RT9742GNGJ5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742GNGJ5 Overview
The package is in the form of a Cut Tape (CT).It's included in the SOT-23-5 Thin, TSOT-23-5 package.The lighting driver has the mounting type Surface Mount.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.As a result, there are 5 terminations.In order to operate, the 23 pins are used.It has 1 functions.This operation requires the maximum output current to be decreased to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.It has 70mOhm resistance.This LED driver is configured to have a maximum supply voltage of 6V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.
RT9742GNGJ5 Features
Supplied from 5V
Resistance of 70mOhm
RT9742GNGJ5 Applications
There are a lot of Richtek USA Inc. RT9742GNGJ5 Power Switches ICs applications.
- Hot Swap
- Solid-State Drives
- Portable Video Game Players
- Storage (HDDs, SSDs)
- Solid State Drivers
- USB Power Distribution
- Portable GPS Device
- Set-Top Boxes
- USB Protection
- PC Card Hot Swap
