RT9742GNGJ5F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742GNGJ5F Overview
As a result, it is packaged in the form of a Cut Tape (CT).It is included with the SOT-23-5 Thin, TSOT-23-5 package as well.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Status Flag features.It consists of 5 terminations in total.For operation, we use the 23 pins.It contains 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.The supply voltage can be 5V for high efficiency.In this LED driving board, there is 55mOhm resistance.This LED driver is configured to have a maximum supply voltage of 6V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.
RT9742GNGJ5F Features
Supplied from 5V
Resistance of 55mOhm
RT9742GNGJ5F Applications
There are a lot of Richtek USA Inc. RT9742GNGJ5F Power Switches ICs applications.
- Portable GPS Device
- Wireless Headsets
- Notebook and Tablet Computers
- Set-top-box
- Portable Music Players
- Portable Devices
- Notebook PC
- Portable/Handheld Devices
- Hot Swap
- Hot Swaps
