RT9742KNGV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.65A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742KNGV Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).It is included with the TO-236-3, SC-59, SOT-23-3 package as well.This lighting drivere has a mounting type of Surface Mount.A USB Switch switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.As a result, there are 3 terminations.3 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Lighting drivers with 70mOhm resistance are used.The maximum supply voltage for this lighting driver is set to 6V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.
RT9742KNGV Features
Supplied from 5V
Resistance of 70mOhm
RT9742KNGV Applications
There are a lot of Richtek USA Inc. RT9742KNGV Power Switches ICs applications.
- Storage Drives
- USB Ports/Hubs
- Wireless/Networking Cards
- USB Power Distribution
- Handheld Devices
- USB Power Distribution
- Hot Swaps
- Portable GPS Device
- Set-Top Boxes
- Storage (HDDs, SSDs)
