banner_page

RT9742MGJ5

N-Channel 0.939mm PMIC 5V SOT-23-5 Thin, TSOT-23-5


  • Manufacturer: Richtek USA Inc.
  • Nocochips NO: 682-RT9742MGJ5
  • Package: SOT-23-5 Thin, TSOT-23-5
  • Datasheet: -
  • Stock: 651
  • Description: N-Channel 0.939mm PMIC 5V SOT-23-5 Thin, TSOT-23-5 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case SOT-23-5 Thin, TSOT-23-5
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Published 2016
Feature Load Discharge
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.939mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code R-PDSO-G5
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.5A
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~6V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 1.65A
Rds On (Typ) 70m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 2.8955mm
RoHS Status ROHS3 Compliant

RT9742MGJ5 Overview


The package is in the form of a Cut Tape (CT).Package SOT-23-5 Thin, TSOT-23-5 contains it.This lighting drivere has a mounting type of Surface Mount.It owns the USB Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.Load Discharge features are available on the lighting driver.As a result, there are 5 terminations.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.The LED driver is configured with a maximum supply voltage of 6V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.

RT9742MGJ5 Features


Supplied from 5V

RT9742MGJ5 Applications


There are a lot of Richtek USA Inc. RT9742MGJ5 Power Switches ICs applications.

  • HDD and SSD
  • Set-top-box
  • Wearable Devices
  • Wireless/Networking Cards
  • Notebook PC
  • Smartphone and PDA
  • USB Ports/Hubs
  • Set-Top Boxes
  • Portable GPS Device
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good