RT9742MNGJ5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 23 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.65A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 2.8955mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9742MNGJ5 Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).This package is included in SOT-23-5 Thin, TSOT-23-5.It has been mounted as Surface Mount on the LED driver.It owns the USB Switch switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.In total, there are 5 terminations.The operation is performed through the 23 pins.The LED driving board has a total of 1 functions.Maximum output current falls to 1.5A when operation criteria are met.Using a voltage of 5V allows for high efficiency.The LED driver has 70mOhm resistance.In this case, Vsup (maximum supply voltage) is set to 6V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.
RT9742MNGJ5 Features
Supplied from 5V
Resistance of 70mOhm
RT9742MNGJ5 Applications
There are a lot of Richtek USA Inc. RT9742MNGJ5 Power Switches ICs applications.
- Wireless/Networking Cards
- Portable Devices
- Gaming
- Hot Swap
- HDD, SSD
- Hard Disk Drives
- Notebook and Tablet Computers
- USB Protection
- Portable/Handheld Devices
- Portable GPS
