Parameters |
Mount |
PCB, Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
2917 (7343 Metric) |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
FPCAP, UB |
Size / Dimension |
0.287Lx0.169W 7.30mmx4.30mm |
Tolerance |
±20% |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Termination |
SMD/SMT |
Type |
Polymer |
Applications |
General Purpose |
Capacitance |
270μF |
Voltage - Rated DC |
2V |
Depth |
4.3mm |
Case Code (Metric) |
7343 |
Case Code (Imperial) |
2917 |
Lead Pitch |
4.1mm |
ESR (Equivalent Series Resistance) |
9mOhm |
Voltage |
2V |
Lifetime @ Temp |
1000 Hrs @ 105°C |
Leakage Current |
700μA |
Ripple Current |
3.3A |
Life (Hours) |
1000 hours |
Height |
1.9mm |
Height Seated (Max) |
0.079 2.00mm |
RoHS Status |
RoHS Compliant |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917 (7343 Metric). This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to FPCAP, UB series. This part is mounted in the way of Surface Mount. The type of the RUB0D271MLG capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon RUB0D271MLG is suitable to conduct the ripple current at 3.3A. RUB0D271MLG Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 2V. RUB0D271MLG Capacitor. There are 700μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. The voltage for the part is specified as 2V volts. The 2917 refer to case code (imperial). Case Code (Metric) includes 7343.
FPCAP, UB Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: 2917 (7343 Metric)
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of RUB0D271MLG Aluminum Polymer Capacitors.
Typically, RUB0D271MLG is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Smoothing Noise Filtering
- Flashtube Ignition
- To enhance power efficiency
- Signal decoupling & power bypass
- Spot Welding
- Motor Start
- PFC
- Frequency Converters
- Audio Crossover
- Motor Control