S-8340A56AFT-T2-U
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5.6V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 0.8V~6V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.24V |
| Topology | Boost |
| Frequency - Switching | 600kHz |
| Input Voltage (Max) | 3.36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 89% |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
S-8340A56AFT-T2-U Overview
It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. A 0.8V~6V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at 600kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . The 8 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. This dc dc voltage regulator should be powered by a voltage of 2.24V. The test statistics indicate that DC regulator outputs a voltage of 5.6V. It should be fully noted that the dc to dc regulator only accepts 3.36V input voltage at most.
S-8340A56AFT-T2-U Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
S-8340A56AFT-T2-U Applications
There are a lot of ABLIC U.S.A. Inc. S-8340A56AFT-T2-U DC to DC converter applications.
- Mobile phones
- Packaging
- Experimental setup
- Thermal power
- Production lines
- Hydro power
- Flexible manufacturing cells
- Electric water heaters
- Program control systems
- Serial communication converter
