S-8520F55MC-BOOT2U
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| JESD-30 Code | R-PDSO-G5 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.5V~16V |
| Control Features | Enable |
| Input Voltage (Min) | 2.5V |
| Topology | Buck |
| Output Current-Max | 0.05A |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
S-8520F55MC-BOOT2U Overview
Capsuled in the SC-74A, SOT-753 package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. A 2.5V~16V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. It can switch at 300kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 5 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 2.5V should be the minimum input voltage for the dc dc voltage regulator. A 5.5V voltage of DC regulator was detected in the test statistics. Whenever the current value is 0.05A, switching converter outputs the highest possible value.
S-8520F55MC-BOOT2U Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
S-8520F55MC-BOOT2U Applications
There are a lot of ABLIC U.S.A. Inc. S-8520F55MC-BOOT2U DC to DC converter applications.
- Surge protection circuits
- Magnetohydrodynamic power
- Alternators
- Correction machines
- Post equipment
- Medical equipment
- Handheld GPS
- Direct power supply system
- Driver circuits
- Electrical power transmission
