S-881300CPE-IPATFG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-SMD, Flat Lead |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e6/e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | TIN BISMUTH/TIN SILVER |
| Applications | Backlight |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Pin Count | 10 |
| JESD-30 Code | R-PDSO-F10 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3V |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 4.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Switcher Configuration | BOOST |
| Current - Output / Channel | 23mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Max) | 4.5V |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.9mm |
| Length | 2.9mm |
| Width | 2.8mm |
| RoHS Status | RoHS Compliant |
S-881300CPE-IPATFG Overview
There is a 10-SMD, Flat Lead package on the board that is used to save space. For the design of this LED driver, 3 outputs are used.The mounting method is Surface Mount.With high efficiency, it appears as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight has significant advantages.Using the frequency of 600kHz, it operates.In this case, it uses 10 terminations.Undetermined failures may occur when the voltage supply is less than 2.7V.It consists of 10 pins.Optimally, it provides a voltage value of 4.5V for the maximum supply voltage.The circuit is assigned 3V volts when the device is in operation.Using an input voltage greater than or equal to 2.7V provides great convenience to its operation.When the input voltage is kept below 4.5V, high stability can be achieved.
S-881300CPE-IPATFG Features
Available in the 10-SMD, Flat Lead package
Operating temperature of -40°C~85°C TA
Frequency of 600kHz
S-881300CPE-IPATFG Applications
There are a lot of ABLIC U.S.A. Inc. S-881300CPE-IPATFG LED Driver ICs applications.
- Scanners and Handy Terminals
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Museum lighting
- Flicker-free LED Lighting using R1580N
- Amusement Machines
