S18SN6DQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP69K |
| Approval Agency | CE, CSA, IEC, UL |
| Output Configuration | NPN - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared LED |
| Min Supply Voltage (DC) | 10V |
| Length | 59.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
S18SN6DQ Overview
For reliable operation, the photoelectric sensor's temperature should be set to -40°C~70°C. Electronic components require a voltage of 10V~30V to function in a circuit or system. A photoelectric sensor with a response time of 3ms is considered to be ideal. The 4 pins on the photoelectric sensor need to be connected for it to work. Photoelectric sensors require an output current of 150mA to operate. Photoelectric sensors can handle voltages up to 30V in DC circuits without causing damage. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
S18SN6DQ Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SN6DQ Applications
There are a lot of Banner Engineering Corporation S18SN6DQ Photoelectric Sensors applications.
- Zone scanners
- Monitoring bigger areas for objects with light grids
- Pharmaceutical industry
- Counting small objects
- Contrast sensors
- Logistics and materials handling
- Passive infrared sensors
- Luminescence sensors
- Measuring distance
- Detecting colours
