S18SP6D
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | PBT |
| Body Material | PBT, Polyester |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Length | 59.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67, IP69K |
S18SP6D Overview
For reliable performance, set the temperature of the photoelectric sensor to -40°C~70°C. Electronic components require a voltage of 10V~30V to function in a circuit or system. Sensors with a response time of 3ms are ideal. The photoelectric sensor must be connected to the 4 pins in order to function properly. In order for a photoelectric sensor to function, the output current should be 150mA. There is no damage to the photoelectric sensor if the maximum voltage of 30V is applied to the DC circuit. Using a voltage as low as possible, such as 10V, this photoelectric sensor can operate.
S18SP6D Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6D Applications
There are a lot of Banner Engineering Corporation S18SP6D Photoelectric Sensors applications.
- Contrast sensors
- detect objects
- Checking objects on production lines or conveyors
- Logistics and materials handling
- Detecting colours
- Material handling
- Mechanical engineering
- Entrance and gate
- Automotive industry
- Pharmaceutical industry
