S18SP6DQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2005 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP69K |
| Approval Agency | CE, CSA, IEC, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared LED |
| Min Supply Voltage (DC) | 10V |
| Length | 59.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
S18SP6DQ Overview
The temperature of photoelectric sensor should be set to -40°C~70°C to ensure reliable performance. For these electronic components to function, a voltage of 10V~30V should be applied to a circuit or system. Photoelectric sensors are considered to have an optimal response time of 3ms. The photoelectric sensor must have the 4 pins connected to work properly. In order for a photoelectric sensor to function, the output current should be 150mA. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. At low voltages, such as 10V, this photoelectric sensor is capable of working.
S18SP6DQ Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6DQ Applications
There are a lot of Banner Engineering Corporation S18SP6DQ Photoelectric Sensors applications.
- Detecting colours
- Contrast sensors
- Passive infrared sensors
- Material handling
- Mechanical engineering
- Measuring distance
- detect objects
- Entrance and gate
- Pharmaceutical industry
- Luminescence sensors
