Parameters |
Number of Pins |
4 |
Operating Temperature |
-40°C~70°C |
Published |
2006 |
Series |
S18 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
10V~30V |
Ingress Protection |
NEMA 6P, IEC IP69K |
Output Configuration |
PNP - Dark-ON/Light-ON |
Output Current |
150mA |
Contact Current Rating |
150mA |
Response Time |
3ms |
Sensing Distance |
3.937 (100mm) |
Sensing Method |
Background Suppression |
Max Supply Voltage (DC) |
30V |
Connection Method |
Connector |
Light Source |
Infrared LED |
Min Supply Voltage (DC) |
10V |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Ratings |
IP69K |
S18SP6FF100Q Overview
To make sure the photoelectric sensor works, set its temperature to zero. Electronic components should be connected to a circuit or system by 10V~30V voltage. Photoelectric sensors should have a response time of 3ms. The photoelectric sensor must be connected to the 4 pins in order to function properly. Photoelectric sensors are designed to operate with a current of 150mA at the output. Photoelectric sensors can withstand voltages up to 30V in DC circuits. Unlike most photoelectric sensors, this one operates at a very low voltage such as 0 volts.
S18SP6FF100Q Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6FF100Q Applications
There are a lot of Banner Engineering Corporation S18SP6FF100Q Photoelectric Sensors applications.
- Material handling
- Mechanical engineering
- Checking objects on production lines or conveyors
- Zone scanners
- Detecting colours
- Counting small objects
- detect objects
- Entrance and gate
- Logistics and materials handling
- Automatic doors