banner_page

S18SP6FF50Q

10V~30V S18 Series Background Suppression 4-Pin -40°C~70°C


  • Manufacturer: Banner Engineering Corporation
  • Nocochips NO: 124-S18SP6FF50Q
  • Package: -
  • Datasheet: PDF
  • Stock: 669
  • Description: 10V~30V S18 Series Background Suppression 4-Pin -40°C~70°C (Kg)

Details

Tags

Parameters
Number of Pins 4
Operating Temperature -40°C~70°C
Published 2006
Series S18
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Voltage - Supply 10V~30V
Ingress Protection NEMA 6P, IEC IP69K
Output Configuration PNP - Dark-ON/Light-ON
Output Current 150mA
Throw Configuration SPDT
Response Time 3ms
Sensing Distance 1.969 (50mm)
Sensing Method Background Suppression
Max Supply Voltage (DC) 30V
Connection Method Connector
Light Source Infrared LED
Min Supply Voltage (DC) 10V
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Ratings IP69K

S18SP6FF50Q Overview


In order to work reliably, the photoelectric sensor should be set to -40°C~70°C. For these electronic components to work, the voltage should be provided by 10V~30V. For photoelectric sensors, a response time of 3ms is considered optimal. In order to make the photoelectric sensor work properly, it must have 4 pins connected. A photoelectric sensor must have a current at the output of 150mA in order to function. DC circuit can apply a maximum voltage of 30V without harming the photoelectric sensor. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor.

S18SP6FF50Q Features


Sensing Distance: 1.969 (50mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V

S18SP6FF50Q Applications


There are a lot of Banner Engineering Corporation S18SP6FF50Q Photoelectric Sensors applications.

  • Measuring distance
  • Counting small objects
  • Passive infrared sensors
  • Mechanical engineering
  • Monitoring bigger areas for objects with light grids
  • Luminescence sensors
  • Contrast sensors
  • Material handling
  • detect objects
  • Entrance and gate

Write a review

Note: HTML is not translated!
    Bad           Good