S18SP6LPQ
| Parameters | |
|---|---|
| Housing Material | PBT |
| Body Material | Polyester, Thermoplastic |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| Length | 78mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
| Mount | Panel |
| Number of Pins | 4 |
S18SP6LPQ Overview
For reliable performance, set the photoelectric sensor's temperature to zero. If you want these electronic components to work, you need to apply 10V~30V. When it comes to photoelectric sensors, a response time of 3ms is ideal. 4 pins must be connected for the photoelectric sensor to work. Photoelectric sensors must have an output current of 150mA in order to operate. There is no damage to the photoelectric sensor when applied a voltage of 30V in a DC circuit. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
S18SP6LPQ Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6LPQ Applications
There are a lot of Banner Engineering Corporation S18SP6LPQ Photoelectric Sensors applications.
- Luminescence sensors
- Logistics and materials handling
- Entrance and gate
- Detecting colours
- Checking objects on production lines or conveyors
- Contrast sensors
- Mechanical engineering
- Counting small objects
- Automatic doors
- Material handling
