S80C188EC25
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e0 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 125mA |
| Bit Size | 16 |
| Access Time | 25 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Height Seated (Max) | 3.15mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
S80C188EC25 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in QFP. In order to provide high reliability, advanced packaging method Bulk is used. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. Total terminations are 100. Turn on the cpu microprocessor and let it run with a 5V voltage supply. A 16-Bit architecture is used. There is 25MHz frequency set for the CPU. You can refer to the datasheets for the functions of 100 pins. The cpu microprocessor Microprocessors is typical. An external data bus width of 8 is available on this CPU. An environment with temperatures higher than 70°C should not be used for the CPU microprocessor. Injecting pins into the embedded microprocessor body results in 100 pins. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. In this case, 5V is the starting point. As specified in datasheets, the embedded microprocessor requires 5V power supplies. A CPU core voltage of 5V is present. The CPU can only be powered by voltages up to 125mA. Microprocessors should never be supplied with voltages above 5.5V in normalcircumstances. Micro processors should be supplied with 4.5V as their lowest voltage.
S80C188EC25 Features
16-Bit Structure
S80C188EC25 Applications
There are a lot of Intel S80C188EC25 Microprocessor applications.
- Routers
- PDAs, game consoles
- Telephone sets
- Playstation
- Toasters
- Information appliances (networking of household appliances)
- Embedded gateways
- Equipment control
- Agriculture, transportation field
- Paper shredders
