SA5230DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SA5230 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 7.5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 110μA |
| Power Dissipation | 500mW |
| Output Current | 6mA |
| Slew Rate | 0.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~15V ±0.9V~7.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 600kHz |
| Neg Supply Voltage-Nom (Vsup) | -7.5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 400μV |
| Max Frequency | 1kHz |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 250 kHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SA5230DG Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 7.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. Op amp ic rates 3mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 1.1mA can be used to operate this linear amplifier. Keeping the voltage gain at 126.02dB is the best course of action. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 7.5V.
SA5230DG Features
8 Pins
supply voltage of 7.5V
126.02dB voltage gain
Output Type: Rail-to-Rail
SA5230DG Applications
There are a lot of ON Semiconductor SA5230DG Instrumentational OP Amps applications.
- Proportional counter tubes
- High/low-pass filter circuit
- Wireless base stations
- Division circuits
- Non-polarized electrodes
- Television
- Large motor controllers
- Signal transformation
- Band-stop filter
- Addition operation circuits
