SA5230N
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SA5230 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 7.5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 110μA |
| Output Current | 6mA |
| Slew Rate | 0.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~15V ±0.9V~7.5V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 600kHz |
| Neg Supply Voltage-Nom (Vsup) | -7.5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 250 kHz |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SA5230N Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. This linear amplifier should be powered by an 7.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 400μV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 1.1mA . It is a member of the 126.02dB's 126.02dB family. In total, there are 1 circuits on this buffer amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 7.5V.
SA5230N Features
8 Pins
supply voltage of 7.5V
126.02dB voltage gain
Output Type: Rail-to-Rail
SA5230N Applications
There are a lot of ON Semiconductor SA5230N Instrumentational OP Amps applications.
- Navigation
- Home audio systems
- Power control
- Test equipment
- Automation control systems
- Portable electronic products powered by batteries
- Large motor controllers
- Power generator
- Communication
- Test and measurement instruments
