SA5532APE4

2 Channels 38mA per Channel 800nA 70 dB Instrumentational OP Amps 15V 8 Pins PDIP

Manufacturer: Texas Instruments
Nocochips NO: 815-SA5532APE4
Package: PDIP
Datasheet: PDF
Stock: 123
Description: 2 Channels 38mA per Channel 800nA 70 dB Instrumentational OP Amps 15V 8 Pins PDIP(Kg)

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Package / Case	PDIP
Surface Mount	NO
Number of Pins	8
JESD-609 Code	e4
Pbfree Code	yes
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Operational Amplifier
Packing Method	TUBE
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	THROUGH-HOLE
Number of Functions	2
Supply Voltage	15V
Pin Count	8
Operating Supply Voltage	15V
Power Supplies	+-5/+-15/10/30V
Temperature Grade	INDUSTRIAL
Number of Channels	2
Operating Supply Current	8mA
Nominal Supply Current	16mA
Current - Output	38mA
Slew Rate	9 V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio	70 dB
Current - Input Bias	800nA
Output Current per Channel	38mA
Input Offset Voltage (Vos)	500μV
Bandwidth	10MHz
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Max Dual Supply Voltage	15V
Low-Bias	NO
Micropower	NO
Min Dual Supply Voltage	5V
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	4mV
Power	NO
Input Offset Current-Max (IIO)	0.15μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

SA5532APE4 Overview

A PDIP case is used to package the op amp. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp rates 500μV as input offset voltage. As long as the supply current of the chip does not exceed 8mA, this op amp ic can operate. You should keep the voltage gain at 100dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. Using this buffer op amp requires a temperature of at least -40°C. It should only be used at temperatures up above 85°C. The operating supply voltage of the buffer op amp is rated at 15V. It is used TUBE to pack the op amps. This electrical part should be conducted under the dual supply voltage of 15V volts when you conduct this part.