SA5534APE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 8mA |
| Current - Output | 38mA |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1.5μA |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Max Dual Supply Voltage | 15V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 5V |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.3μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SA5534APE4 Overview
In order to protect the op amps, a PDIP case is used. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 4mA and 10 . 100dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 15V. A TUBE-shaped amplifier is used to pack the buffer amps. As a general rule, you should conduct this electronic component under dual supply voltages of 15V volts.
SA5534APE4 Features
8 Pins
supply voltage of 15V
100dB voltage gain
SA5534APE4 Applications
There are a lot of Texas Instruments SA5534APE4 Instrumentational OP Amps applications.
- Ultrasound transducers
- Radar
- Subtraction operation circuits
- ECG equipment
- Laptop
- Gaming industry
- High-frequency data acquisition systems
- Portable electronic products powered by batteries
- Test equipment
- Industrial applications including automation
