SA5534NG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SA5534 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.15W |
| Output Current | 38mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 500μV |
| Nominal Gain Bandwidth Product | 10MHz |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SA5534NG Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 4mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 4mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 20V. It is used RAIL to pack the op amps.
SA5534NG Features
8 Pins
supply voltage of 15V
100dB voltage gain
SA5534NG Applications
There are a lot of ON Semiconductor SA5534NG Instrumentational OP Amps applications.
- Industrial applications including automation
- Video conversion and routing
- Fast A/D and D/A converters
- Portable media players
- Cinema or auditorium audio system
- Addition operation circuits
- Proportional counter tubes
- Automatic control
- Video amplifiers
- Strain gauges
