SB80C188EC13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 100-BFQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | i186 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 13MHz |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | 80C186 |
| Supply Current-Max | 70mA |
| Bit Size | 16 |
| Access Time | 13 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Voltage - I/O | 5.0V |
| Number of Cores/Bus Width | 1 Core 16-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | Serial Communications Unit (SCU) |
| Height Seated (Max) | 1.66mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
SB80C188EC13 Overview
The embedded microprocessor has been packed in 100-BFQFP for convenient overseas shipping. Advanced packaging method Tray is used to provide high reliability. There are 1 Core 16-Bit cores/bus width on the CPU. Extended operating temperature around 0°C~70°C TA. In the series i186, it is found. This CPU is cored with a 80C186 processor. This CPU uses DRAM RAM controllers. This microprocessor is equipped with an interface of Serial Communications Unit (SCU). There is 5.0V I/O running on this CPU. It is a MICROPROCESSOR in terms of uPs/uCs/Peripheral ICs. Total terminations are 100. Using a 5V voltage supply, the microprocessor should turn on and run. The architecture of the microprocessor is 16-bit. CPUs operate at 13MHz Hz. For functions of 100 pins, please refer to the datasheets. The cpu microprocessor Microprocessors is typical. An external data bus width of 8 is available on this CPU. There are 100 pins injected into the embedded microprocessor body. Many applications make use of this CPU, which has Surface Mount mounted. As of 5V, the CPU microprocessor is capable of functioning. Datasheets specify that the embedded microprocessor requires 5V power supplies. There is 5V voltage present in the CPU core. Voltage can't exceed 70mA to the CPU. normally, the microprocessor should not receive a voltage higher than 5.5V. There should be 4.5V voltage applied to the CPU microprocessor below 4.5V.
SB80C188EC13 Features
80C186 Core
16-Bit Structure
SB80C188EC13 Applications
There are a lot of Intel SB80C188EC13 Microprocessor applications.
- Torpedo guidance
- Equipment control
- Digital TVs
- Smoke alarms
- Hand-held metering systems
- Measuring revolving objects
- Tape drives
- Metering & measurement field
- Industrial control field
- Petrochemical
