SC1175TSTRT
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SC1175 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~15V |
| Control Features | Enable, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
SC1175TSTRT Overview
With a 20-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 4.2V~15V. Worked in an dc switcher with a 0°C~85°C TA rating. With this switching controller, you can switch at 300kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. A variety of 20 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics can be found by searching "SC1175". 20 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 2.75V voltage according to the test statistics. At most, the dc to dc regulator accepts 15V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 2A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's
SC1175TSTRT Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
SC1175TSTRT Applications
There are a lot of Semtech Corporation SC1175TSTRT DC to DC converter applications.
- Special machining machine tools
- Alternators
- Low output voltage switching power supply circuits
- Geothermal power
- Various precision measuring detectors
- Large fire protection systems
- Precision electronic equipment
- Solar power plants
- Flaw detection equipment
- Nuclear power plants
