SC1205CSTRT
| Parameters | |
|---|---|
| Max Power Dissipation | 660mW |
| Technology | CMOS |
| Voltage - Supply | 4.15V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC1205 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Power Dissipation | 660mW |
| Propagation Delay | 32 ns |
| Input Type | Non-Inverting |
| Rise Time | 24ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 25V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
SC1205CSTRT Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.Using a 4.15V~6V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.This device can operate at temperatures up to 0°C~125°C TJ.Input type of Non-Inverting is used.Initially, the configuration is composed of 8 terminations.You will find various related parts under the base part number SC1205.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.Mosfet driver is designed specifically to run on 5V volts of power.Mosfet driver is possible for the output current to be as low as 3A.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.A boot strap voltage of 25V is the maximum possible high-side voltage.660mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The power supply 5V of the product solves the power supply problem for a variety of applications.In order to operate properly, the operating supply voltage should be set to 5V.By using the frequency 1MHz, we can increase efficiency.
SC1205CSTRT Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 25V
Maximum power dissipation of 660mW
SC1205CSTRT Applications
There are a lot of Semtech Corporation SC1205CSTRT gate drivers applications.
- Portable Media Players
- Pulse transformer drivers
- Industrial Power Supplies
- Motor Drives
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- High current laser/LED systems
- Commercial air-conditioning (CAC)
- Industrial Modules
- Commercial and agricultural vehicles (CAV)
