SC1302DSTRT
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC1302 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Max Supply Current | 8.1mA |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 1.6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
SC1302DSTRT Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 4.5V~16.5V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as the input type in this program.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number SC1302.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.If you want a stable supply current, you should keep it at 8.1mA.
SC1302DSTRT Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
SC1302DSTRT Applications
There are a lot of Semtech Corporation SC1302DSTRT gate drivers applications.
- Digitally controlled power supplies
- serial peripheral interface (SPI), I2C
- Topologies
- DC/DC converters
- Solar inverters
- Video amplifiers
- General Purpose 3-Phase Inverter
- RGB applications
- Commercial and agricultural vehicles (CAV)
- Portable Navigation Devices
