SC1405DITSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 660mW |
| Voltage - Supply | 4.6V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC1405 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 5V |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 30V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC1405DITSTRT Overview
For greater flexibility, the 14-TSSOP (0.173, 4.40mm Width) package is adopted.Tape & Reel (TR) is the form of the package.Configuration is based on 2 drivers.Surface Mount is mounted in the way.Using a 4.6V~6V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~125°C TJ.The input type for this program is Non-Inverting.Its configuration starts with 14 terminations.Numerous related parts can be found under its base part number SC1405.Mounting the device requires Surface Mount.During design, it is configured with 14 pins.With a supply voltage of 5V, it is designed to operate.Mosfet driver is possible for the output current to be as low as 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 14 component pins is available.Maximum (Bootstrap) voltage is 30V.Its maximum power dissipation of 660mW also demonstrates its maximum ability to transfer power without overheating.The power supply 5V of the product solves the power supply problem for a variety of applications.
SC1405DITSTRT Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 30V
Maximum power dissipation of 660mW
SC1405DITSTRT Applications
There are a lot of Semtech Corporation SC1405DITSTRT gate drivers applications.
- General Purpose 3-Phase Inverter
- High-voltage isolated DC-DC converters
- Motor Control
- Active filtering
- Industrial Modules
- Commercial and agricultural vehicles (CAV)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- 3-Phase Motor Inverter Driver
- Solar power supplies
- UPS systems
