banner_page

SC16C2550IA44,518

5V V 4.57mm mm 16.585mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 16.585mm mm CMOS 44 44


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-SC16C2550IA44,518
  • Package: 44-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 762
  • Description: 5V V 4.57mm mm 16.585mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 16.585mm mm CMOS 44 44 (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 44-LCC (J-Lead)
Surface Mount YES
Packaging Tape & Reel (TR)
Published 2000
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
Additional Feature ALSO OPERATES AT 2.5V MINIMUM SUPPLY
HTS Code 8542.31.00.01
Technology CMOS
Voltage - Supply 2.5V 3.3V 5V
Terminal Position QUAD
Terminal Form J BEND
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number SC16C2550
Pin Count 44
JESD-30 Code S-PQCC-J44
Qualification Status Not Qualified
Operating Temperature (Max) 85°C
Operating Temperature (Min) -40°C
Temperature Grade INDUSTRIAL
Number of Channels 2, DUART
uPs/uCs/Peripheral ICs Type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency 80MHz
Address Bus Width 3
Boundary Scan NO
Low Power Mode YES
External Data Bus Width 8
Data Rate (Max) 5Mbps
Number of Serial I/Os 2
Data Transfer Rate-Max 0.625 MBps
Communication Protocol ASYNC, BIT
FIFO's 16 Byte
With False Start Bit Detection Yes
Height Seated (Max) 4.57mm
Length 16.585mm
Width 16.585mm
RoHS Status ROHS3 Compliant

SC16C2550IA44,518 Overview


In addition, it is available in the cost-effective package 44-LCC (J-Lead).The transmission is conducted over 2, DUART channels.In terms of packaging, Tape & Reel (TR) is adopted.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.A configuration of 44 terminations is used.In order to operate it, a supply voltage of 5V is required.In the present state, this electronic part is Obsolete.As a way to communicate data, the board has 2 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 2.5V 3.3V 5V.Electronic devices such as this are known as 44-pin integrated circuits.IC clock frequency is set to 80MHz.UART is able to operate at the maximum temperature of 85°C.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 2.5V MINIMUM SUPPLY.A base part number of SC16C2550 is used for this product.Temperatures as low as -40°C are acceptable to it.

SC16C2550IA44,518 Features


2 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5V MINIMUM SUPPLY

SC16C2550IA44,518 Applications


There are a lot of NXP USA Inc. SC16C2550IA44,518 UARTs applications.

  • Cellular Phones DataPort
  • Battery Operated Electronics
  • Handheld Terminal
  • Domestic Applications
  • Ethernet Network Routers
  • Personal Digital Assistants Modules
  • Universal PCI Bus Add-in Card
  • Router C ontrol
  • Ethernet Network to Serial Ports
  • White goods

Write a review

Note: HTML is not translated!
    Bad           Good