Parameters |
Mounting Type |
Surface Mount |
Package / Case |
64-LQFP |
Surface Mount |
YES |
Packaging |
Tape & Reel (TR) |
Published |
2000 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
64 |
Additional Feature |
OPERATES AT 2.25 V MINIMUM SUPPLY |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V 5V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Reach Compliance Code |
unknown |
Base Part Number |
SC16C554 |
Pin Count |
64 |
JESD-30 Code |
S-PQFP-G64 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
85°C |
Operating Temperature (Min) |
-40°C |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
4, QUART |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
80MHz |
Address Bus Width |
5 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Data Rate (Max) |
5Mbps |
Number of Serial I/Os |
4 |
Data Transfer Rate-Max |
0.625 MBps |
Communication Protocol |
ASYNC, BIT |
FIFO's |
16 Byte |
With False Start Bit Detection |
Yes |
Height Seated (Max) |
1.6mm |
Length |
10mm |
Width |
10mm |
RoHS Status |
ROHS3 Compliant |
SC16C554IB64,128 Overview
The 64-LQFP package is the most cost-effective.Transmission uses 4, QUART channels.As for packaging, Tape & Reel (TR) is chosen.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 64 terminations are used.For its operation, it requires a supply voltage of 3.3V.In the present state, this electronic part is Obsolete.Data communication is supported by 4 serial I/Os.Mounting is possible through Surface Mount.There is 2.5V 3.3V 5V supply voltage for it.This electronic device is a type of 64-pin IC.Its clock frequency is measured at 80MHz.The device is capable of operating at temperatures as high as 85°C.Additionally, it can perform OPERATES AT 2.25 V MINIMUM SUPPLY.Its base part number is SC16C554.A minimum of -40°C is required for operation.
SC16C554IB64,128 Features
4 serial I/Os
Clock frequency of 80MHz
OPERATES AT 2.25 V MINIMUM SUPPLY
SC16C554IB64,128 Applications
There are a lot of NXP USA Inc. SC16C554IB64,128 UARTs applications.
- DTE for Modem Communication Systems
- Ethernet Network Routers
- White goods
- Handheld Terminal
- Factory Automation and Process Controls
- GPS Devices
- Router C ontrol
- Factory Automation
- Multi-port RS-232/RS-422/RS-485 Cards
- Factory automation and process control