Parameters |
Mounting Type |
Surface Mount |
Package / Case |
44-LCC (J-Lead) |
Surface Mount |
YES |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
Additional Feature |
ALSO OPERATES AT 2.5V MINIMUM SUPPLY |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V 5V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
SC16C650 |
Pin Count |
44 |
JESD-30 Code |
S-PQCC-J44 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
85°C |
Operating Temperature (Min) |
-40°C |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
1, UART |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
48MHz |
Address Bus Width |
3 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Data Rate (Max) |
3Mbps |
Number of Serial I/Os |
1 |
Data Transfer Rate-Max |
0.375 MBps |
Communication Protocol |
ASYNC, BIT |
FIFO's |
32 Byte |
With False Start Bit Detection |
Yes |
Height Seated (Max) |
4.57mm |
Length |
16.585mm |
Width |
16.585mm |
RoHS Status |
ROHS3 Compliant |
SC16C650AIA44,518 Overview
There is a cost-effective package 44-LCC (J-Lead) available.The transmission is conducted over 1, UART channels.Tape & Reel (TR) is adopted for packaging.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 44 terminations are used.The device operates at 5V voltage.At present, this electronic part has a status of Obsolete.As a means of communicating data, there are 1 serial I/Os available.UART can be mounted through a way of Surface Mount.During operation, the supply voltage is set to 2.5V 3.3V 5V.This device is an integrated circuit with 44 pins.The clock frequency of this IC is measured at 48MHz.A maximum temperature of 85°C is possible for it to operate at.Additionally, it is capable of performing ALSO OPERATES AT 2.5V MINIMUM SUPPLY.SC16C650 is used as its base part number.At a minimum temperature of -40°C, it is capable of operating.
SC16C650AIA44,518 Features
1 serial I/Os
Clock frequency of 48MHz
ALSO OPERATES AT 2.5V MINIMUM SUPPLY
SC16C650AIA44,518 Applications
There are a lot of NXP USA Inc. SC16C650AIA44,518 UARTs applications.
- Network Management
- Portable Appliances
- Handheld Terminal
- Point-of-Sale Systems
- Wireless Infrared Data Communications Systems
- Portable and battery operated devices
- Infrared Transceivers
- Point-of- Sale Terminals
- Serial to Parallel/Parallel to Serial Converter
- Remote Access Servers