SC16C650BIBS
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 32 |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 2.5V OR 3.3V SUPPLY |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.25V |
| Nominal Supply Current | 4.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Data Rate | 3 Mbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC16C650BIBS Overview
Transmission is done through 1 channels.Packaging is based on Bulk.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 32 terminations.The supply voltage of 5V is provided for its operation.Data is communicated via 1 serial I/Os.This device is an integrated circuit with 32 pins.IC clock frequency is set to 48MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.To ensure long-term operation, the operating temperature should not exceed -40°C.To ensure long-term operation, the operating temperature should not exceed 85°C.The configuration relies on the 32 pins.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.5V.Supply voltages above 2.25V are known to ensure reliability.5V is the supply voltage provided for high-efficiency operation.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V OR 3.3V SUPPLY as well.
SC16C650BIBS Features
1 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 2.5V OR 3.3V SUPPLY
SC16C650BIBS Applications
There are a lot of NXP Semiconductors / Freescale SC16C650BIBS UARTs applications.
- Infrared Transceivers
- Universal PCI Bus Add-in Card
- Router C ontrol
- Wireless Infrared Data Communications Systems
- Portable and battery operated devices
- Communications equipment
- Cellular data devices
- Serial to Parallel/Parallel to Serial Converter
- Network Management
- Factory Automation
