Parameters |
Address Bus Width |
5 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Data Rate (Max) |
5Mbps |
Number of Serial I/Os |
4 |
Data Transfer Rate-Max |
0.625 MBps |
Communication Protocol |
ASYNC, BIT |
FIFO's |
64 Byte |
With False Start Bit Detection |
Yes |
Height Seated (Max) |
4.572mm |
Length |
24.2316mm |
Width |
24.2316mm |
RoHS Status |
ROHS3 Compliant |
Mounting Type |
Surface Mount |
Package / Case |
68-LCC (J-Lead) |
Surface Mount |
YES |
Packaging |
Tube |
Published |
2003 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
68 |
Additional Feature |
ALSO OPERATES AT 2.5V SUPPLY |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V 5V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Base Part Number |
SC16C654 |
Pin Count |
68 |
JESD-30 Code |
S-PQCC-J68 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
85°C |
Operating Temperature (Min) |
-40°C |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
4, QUART |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
80MHz |
SC16C654IA68,529 Overview
Alternatively, UART can be purchased in the cost-effective 68-LCC (J-Lead) package.The transmission of information is carried out through 4, QUART channels.As far as packaging is concerned, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.There are 68 terminations used in its configuration.During operation, it receives a voltage of 3.3V.As of right now, this electronic part is in a Obsolete status.Data communication is supported by 4 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 2.5V 3.3V 5V.Electronic devices such as this are known as 68-pin integrated circuits.This IC operates at a clock frequency of 80MHz.UART is able to operate at the maximum temperature of 85°C.Additionally, it can perform ALSO OPERATES AT 2.5V SUPPLY.As a base part number, it is specified as SC16C654.A minimum of -40°C is required for operation.
SC16C654IA68,529 Features
4 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5V SUPPLY
SC16C654IA68,529 Applications
There are a lot of NXP USA Inc. SC16C654IA68,529 UARTs applications.
- Battery Operated Instruments
- Network Management
- Portable Applications
- Personal Digital Assistants Modules
- Router C ontrol
- Cellular data devices
- GPS Systems
- Domestic Applications
- Personal Digital Assistants
- Handheld Terminal