SC16C850IET,157
| Parameters | |
|---|---|
| JESD-30 Code | S-PBGA-B36 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.625 MBps |
| FIFO's | 128 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1.15mm |
| Length | 3.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 36-TFBGA |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2010 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CAN ALSO OPERATE AT 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V~3.3V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C850 |
| Pin Count | 36 |
SC16C850IET,157 Overview
Alternatively, UART can be purchased in the cost-effective 36-TFBGA package.The transmission of information is carried out through 1, UART channels.In terms of packaging, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.There are 36 terminations used in its configuration.This device is powered by a voltage of 3.3V.At present, this electronic part has a status of Obsolete.As a way to communicate data, the board has 1 serial I/Os.You can mount it by using Surface Mount.This device operates at 2.5V~3.3V.This electronic device belongs to the 36-pin IC family.Its clock frequency is measured at 80MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.UART can operate at a maximum temperature of 85°C.When power supplies of 2.5/3.3V are available, it is a reliable and efficient power supply for electronic designers.Furthermore, it was shown to be capable of performing CAN ALSO OPERATE AT 2.5V SUPPLY.Its base part number is SC16C850.The device can operate at a temperature of -40°C.
SC16C850IET,157 Features
1 serial I/Os
Clock frequency of 80MHz
Power supplies of 2.5/3.3V
CAN ALSO OPERATE AT 2.5V SUPPLY
SC16C850IET,157 Applications
There are a lot of NXP USA Inc. SC16C850IET,157 UARTs applications.
- Domestic Applications
- GPS Systems
- Handheld Terminals and Tablets
- DTE for Modem Communication Systems
- Portable Appliances
- Universal PCI Bus Add-in Card
- Personal Digital Assistants Modules
- Multimedia Systems
- Handheld Computers
- Point-of- Sale Terminals
