SC16C850VIBS
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 32 |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 2mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Data Rate | 5 Mbps |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Touchscreen | Infrared (IR) |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
SC16C850VIBS Overview
Transmission uses 1 channels.When UART comes to packaging, Bulk is adopted as the packaging method.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.Configured with 32 terminations.UART operates on 1.8V supply voltage.There are 1 serial I/Os working as a way for data communication.An 32-pin integrated circuit is what this particular device is.A frequency of 80MHz is measured for this IC.This item is classified as Serial IO/Communication Controllers due to a number of similarities.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.The configuration of this device is based on the 32 pins.As long as the supply voltage is kept below 1.95V, reliability can be ensured.In order to maintain reliability, the supply voltage should be kept above 1.65V.In order for the device to operate efficiently, 1.8V is the supply voltage.
SC16C850VIBS Features
1 serial I/Os
Clock frequency of 80MHz
Operating supply voltage of 1.8V
SC16C850VIBS Applications
There are a lot of NXP Semiconductors / Freescale SC16C850VIBS UARTs applications.
- Ethernet Network Routers
- DTE for Modem Communication Systems
- Cellular data devices
- Telecommunication Network Routers
- Cellular Data
- GPS Devices
- Multimedia Systems
- Handheld Terminal
- Wireless Infrared Data Communications Systems
- Universal PCI Bus Add-in Card
