SC2441ATETRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC2441 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 1.8V~20V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 1.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 90 % |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2441ATETRT Overview
This switching controller fits most application requirements since it is packaged in a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. This dc motor controller can be used to generate outputs with 2 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 1.8V~20V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the Up to 1MHz position. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 28 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 8V. You can find other relevant dc to dc converter ics by searching "SC2441". 28 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 1.8V is the minimum required for the dc dc voltage regulator. DC regulator outputs 600mV voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching converter outputs current to the greatest value of 2A.
SC2441ATETRT Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
SC2441ATETRT Applications
There are a lot of Semtech Corporation SC2441ATETRT DC to DC converter applications.
- Post equipment
- Geothermal power
- Television equipment
- Surface processing equipment
- Bending machines
- Adjustable voltage or current linear circuits
- Arc suppression circuits
- Network technology
- Mobile phones
- Combined machine tools
