SC2602LSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | SC2602 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1kA |
| Voltage - Supply (Vcc/Vdd) | 4.2V~12.6V |
| Max Supply Current | 6mA |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2602LSTRT Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 4.2V~12.6V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 200kHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Phase Control, Power Good, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 14 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Searching "SC2602" will return other relevant dc to dc converter ics. Total pins of switching converter are 14. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.2V. Statistically, the DC regulator outputs 800mV voltage. normally, the dc dc regulator's output current is 1kA, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 95 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIf the current exceeds 6mA, the component may not operate correctly and may even be damaged.
SC2602LSTRT Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
SC2602LSTRT Applications
There are a lot of Semtech Corporation SC2602LSTRT DC to DC converter applications.
- Gear/thread machining machines
- Planers
- Drilling machines
- Industrial robots
- Power supplies of electronic gadgets
- Overvoltage protection circuits in TV sets
- Pipe bending machines
- Scientific research
- Computer monitoring equipment of building
- Emergency lighting monitoring equipment
